Welcome To b2b168.com, Join Free | Sign In
中文(简体) |
中文(繁體) |
Francés |Español |Deutsch |Pусский |
| No.13654324

- Product Categories
- Friendly Links
- home > Supply > Taiwan refractories, refractory agents, shangzhuang Refractories (certified merchants)
Information Name: | Taiwan refractories, refractory agents, shangzhuang Refractories (certified merchants) |
Published: | 2015-03-30 |
Validity: | 0 |
Specifications: | Limited |
Quantity: | |
Price Description: | |
Detailed Product Description: | Glass furnace electronic ceramic kiln equipment used continuously from one end of the furnace to enter and continue to move forward in the drive under the furnace products, transportation equipment, complete heating heating, insulation and cooling process after released from the other side, such collectively referred to as the furnace glass furnace, due to continuous production of refractories sales, production capacity refractory agents, suitable for mass production; higher mechanization, automation; no regenerative kiln loss, low energy consumption sintered products unit, electronic ceramic sintering furnace advanced than other thermal equipment. Brick shape should meet the requirements of quality brick shape quality should meet the following requirements: (1) size tolerance: height tolerance of soil 2%; wedge face and head width tolerance bulk soil 2mm; the difference between the size of the first soil tolerance 1mm; Length Tolerance ± 1%, but the biggest difference is the soil 2mm. (2) edge damage. Allow hot or cold surfaces damaged two sides reached 40mm long and 5mm deep; but not exceed. (3) Loss angle. Hot and cold surfaces are only allowed to have one corner damage, loss angle at three edges and corners of damage does not exceed the length of 50mm. Does not exceed the loss angle of 20mm. (4) Crack. Tile allows fine hairline cracks; not allow cracks parallel to the bearing surface; no longer than 40mm, no wider than the other crack 0.2mm is allowed. (5) pits, melting tracks and drum kits. Allow pits and a maximum diameter of melting traces of 10mm, the maximum depth of 10mm; bulge maximum 0.5mm. There are a number of bricks of various edges of the brick shall not exceed 70% of the total. Taiwan refractories, refractory agents, shangzhuang Refractories (certified merchants) provided by shangzhuang Refractories Co., Ltd., Zhengzhou City. Zhengzhou City shangzhuang Refractories Co. (www.yntjj.com.cn) (www.yntjj.com.cn) is specialized in "carbon brick, high alumina bricks, clay brick, castable, acid brick, brick alkali custom shaped bricks, "the enterprise, the company of" honesty, hard service "concept, to provide you with the highest quality products and services. Welcome to inquire! Contact: Cheng Haitao. |
Admin>>>
You are the 34816 visitor
Copyright © GuangDong ICP No. 10089450, Refractories Co., Ltd., Zhengzhou City shangzhuang All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility
You are the 34816 visitor
Copyright © GuangDong ICP No. 10089450, Refractories Co., Ltd., Zhengzhou City shangzhuang All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility